HP Comware 5 Debug Manual Vol 3

MPLS OAM debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging mpls oam
CAUTION:
Executing this debugging command
might
affect sending and receiving of MPLS OAM protocol packets.
Use this command only when necessary.
Use debugging mpls oam to enable one or all types of debugging for MPLS OAM.
Use undo debugging mpls oam to disable MPLS OAM debugging.
Syntax
debugging mpls oam { all | bdi | cv | decode | defect-detect | error | fdi | ffd |
fsm | hsb | main | packet | process | timer }
undo debugging mpls oam { all | bdi | cv | decode | defect-detect | error | fdi |
ffd | fsm | hsb | main | packet | process | timer }
Default
No debugging is enabled for MPLS OAM.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging.
bdi: Specifies debugging for backward defect indication (BDI) messages.
cv: Specifies debugging for connectivity verification (CV) messages.
decode: Specifies debugging for encoding and decoding.
defect-detect: Specifies debugging for defect detection.
error: Specifies debugging for errors.
fdi: Specifies debugging for forward defect indication (FDI) messages.
ffd: Specifies debugging for fast fault detection.
fsm: Specifies debugging for finite state machine (FSM).
hsb: Specifies debugging for hot standby (HSB).
main: Specifies the main debugging.
55