HP Comware 5 Debug Manual Vol 3

packet: Specifies debugging for packets.
process: Specifies debugging for processing.
timer: Specifies debugging for timers.
Usage guidelines
Table 1 describes the output fields and messages for the debugging mpls oam bdi command.
Table 34 Output from the debugging mpls oam bdi command
Field
Description
OAM Index OAM instance index.
OAM DD OAM defect detection.
Table 2 describes the output fields and messages for the debugging mpls oam cv command.
Table 35 Output from the debugging mpls oam cv command
Field
Description
OAM Index OAM instance index.
OAM DD OAM defect detection.
Table 3 describes the output fields and messages for the debugging mpls oam decode command.
Table 36 Output from the debugging mpls oam decode command
Field
Description
OAM Index OAM instance index.
BIP16 BIP16 check.
Frequency Frequency of OAM packets.
padding Packet payload.
defect location
Number of the Autonomous System (AS) where the
defect is located.
lsr id LSR ID in the TTSI.
tunnel id Tunnel ID in the TTSI.
Out Label Outgoing label.
processing board Main processing board.
InLabel Incoming label.
BoardId Number of the main processing board.
Table 4 describes the output fields and messages for the debugging mpls oam defect-detect command.
Table 37 Output from the debugging mpls oam defect-detect command
Field
Description
OAM Index OAM instance index.
lsr id LSR ID in the TTSI.
56