HP Comware 5 Debug Manual Vol 3

MPLS TE debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging isis traffic-eng
Use debugging isis traffic-eng to enable debugging for IS-IS traffic engineering.
Use undo debugging isis traffic-eng to disable debugging for IS-IS traffic engineering.
Syntax
debugging isis traffic-eng { advertisement | event } [ process-id | vpn-instance vpn-instance-name ]
undo debugging isis traffic-eng { advertisement | event } [ process-id | vpn-instance
vpn-instance-name ]
Default
Debugging for IS-IS traffic engineering is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
advertisement: Specifies debugging for IS-IS advertisements.
event: Specifies debugging for IS-IS traffic engineering events.
process-id: Specifies debugging for an IS-IS process. The process-id argument represents the IS-IS
process ID in the range of 1 to 65535.
vpn-instance vpn-instance-name: Specifies debugging for an MPLS L3VPN instance. The
vpn-instance-name argument represents the VPN instance name, a case-sensitive string of 1 t o 31
characters.
Examples
# Enable debugging for IS-IS traffic engineering events.
<Sysname> debugging isis traffic-eng event
debugging mpls moam packet
Use debugging mpls moam packet to enable debugging for MPLS TP OAM (MOAM).
Use undo debugging mpls moam packet to disable debugging for MOAM.
Syntax
debugging mpls moam packet
undo debugging mpls moam packet
62