HP Comware 5 Debug Manual Vol 3

Syntax
debugging mpls rsvp-te { all | authentication | bundle | encdec | error | hello | hsb | main | msg-hex
| path | perr | ptear | rconf | rerr | resv | rtear | socket | srefresh | timer | tool | traffic-control |
tunnel-id { tunnel-id | all } }
undo debugging mpls rsvp-te { all | authentication | bundle | encdec | error | hello | hsb | main |
msg-hex | path | perr | ptear | rconf | rerr | resv | rtear | socket | srefresh | timer | tool |
traffic-control | tunnel-id { tunnel-id | all } }
Default
Debugging for MPLS RSVP-TE is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging.
authentication: Specifies debugging for authentication.
bundle: Specifies debugging for bundle.
encdec: Specifies debugging for encoding and decoding.
error: Specifies debugging for errors.
hello: Specifies debugging for hello.
hsb: Specifies debugging for hot standby backup.
main: Specifies debugging for main.
msg-hex: Specifies debugging for message hex format.
path: Specifies debugging for paths.
perr: Specifies debugging for path errors.
ptear: Specifies debugging for path tearing down.
rconf: Specifies debugging for reservation confirmation.
rerr: Specifies debugging for reservation errors.
resv: Specifies debugging for reservation message.
rtear: Specifies debugging for reservation tearing down.
socket: Specifies debugging for socket.
srefresh: Specifies debugging for Srefresh.
timer: Specifies debugging for timer.
tool: Specifies debugging for tools.
traffic-control: Specifies debugging for traffic control.
tunnel-id: Specifies tunnel debugging. The tunnel-id argument specifies a single tunnel by ID, which is in
the range of 0 to 2048. The all keyword specifies all tunnels.
64