HP Comware 5 Debug Manual Vol 3

*Nov 13 11:39:19:146 2006 Sysname RSVP/7/PERR:
06:0581: Start PathErr message processing...
// RSVP started to send a PathErr message.
*Nov 13 11:39:19:146 2006 Sysname RSVP/7/PERR:
06:0583: End PathErr message process.
// RSVP finished sending the PathErr message.
# Execute both the debugging mpls rsvp-te ptear and debugging mpls rsvp-te tunnel-id all commands,
and then delete the tunnel.
<Sysname> debugging mpls rsvp-te ptear
<Sysname> debugging mpls rsvp-te tunnel-id all
*Nov 13 11:43:44:179 2006 Sysname RSVP/7/PTEAR:
15:1086: LSPM delete lsp, Send PathTear Msg
// LSPM deleted the LSP and is preparing to send a PathTear message.
*Nov 13 11:43:44:195 2006 Sysname RSVP/7/PTEAR:
16:0263: Form and Send PathTear Msg
// RSVP constructed and sent the PathTear message.
*Nov 13 11:43:44:195 2006 Sysname RSVP/7/PTEAR:
16:0336: Delete FilteSpec In Rsb.
// RSVP deleted the FilteSpec in RSB.
*Nov 13 11:43:44:195 2006 Sysname RSVP/7/PTEAR:
16:0430: Delete Psb
// RSVP deleted PSB.
# Execute both the debugging mpls rsvp-te resv and debugging mpls rsvp-te tunnel-id all commands.
Then the two devices establish an MPLS TE tunnel.
<Sysname> debugging mpls rsvp-te resv
*Nov 13 11:55:29:990 2006 Sysname RSVP/7/RESV:
06:0593: Start Resv message processing...
// RSVP started RESV message processing.
*Nov 13 11:55:29:990 2006 Sysname RSVP/7/RESV:
19:0138: Resv mesg Received with Lih 2818064 for IfAdd 50030101
// RSVP received from address 5003 0101 a RESV message with Lih 2818064.
*Nov 13 11:55:29:990 2006 Sysname RSVP/7/RESV:
19:0141: Session: 88.1.1.1:6
// The se s s i o n i s 8 8 .1.1.1: 6 .
*Nov 13 11:55:29:990 2006 Sysname RSVP/7/RESV:
19:0252: Reservation Style is SE
// The reservation style is SE.
*Nov 13 11:55:29:990 2006 Sysname RSVP/7/RESV:
19:0410: Process Current Flow Descriptor Begin:
// RSVP started to process the current flow descriptor.
*Nov 13 11:55:29:990 2006 Sysname RSVP/7/RESV:
19:0680: Matching RSB Exists
// RSVP found a matching PSB.
68