HP Comware 5 Debug Manual Vol 3

Syntax
debugging mpls te cspf { all | computation | errors | events | tedb }
undo debugging mpls te cspf { all | computation | errors | events | tedb }
Default
Debugging for CSPF is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for MPLS TE CSPF.
computation: Specifies debugging for CSPF calculation.
error: Specifies debugging for errors.
event: Specifies debugging for events.
tedb: Specifies debugging for traffic engineering database (TEDB).
Usage guidelines
Table 10 describes output fields and messages for the debugging mpls te cspf computation command.
Table 56 Output from the debugging mpls te cspf computation command
Field
Description
Beginning pre-process and the next-hop number is
×××.
Preprocessing begins. Number of hops included in the
display path is ×××.
T a b l e 11 describes output fields and messages for debugging mpls te cspf errors command.
Table 57 Output from the debugging mpls te cspf errors command
Field
Description
Others address has been configured to include hop on
this node.
Other addresses on this node have been configured in
the include hop.
Examples
# Configure MPLS basic capability and MPLS TE basic capability on two directly-connected devices.
Execute the debugging mpls te cspf computation command. Configure CSPF.
<Sysname> debugging mpls te cspf computation
*Sep 22 02:20:19:989 2003 Sysname CSPF/7/COMPUTE:
01:7252: Begining CSPF computation.The LspId: 9, IngressLsrId: b0b0b0b, EgressLsrId:
38010101 .
// CSPF computation started. The LSP ID is 9, ingress LSR ID is b0b0b0b, and egress LSR ID is 38010101.
*Sep 22 02:20:20:167 2003 Sysname CSPF/7/COMPUTE:
01:7262: The TE-class number is 7.
// The TE class number is 7.
*Sep 22 02:20:20:267 2003 Sysname CSPF/7/COMPUTE:
70