Manualshelf

HP Comware 5 Debug Manual Vol 3

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
81828384858687888990
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for MPLS TE management.
auto-bandwidth-adjustment: Specifies debugging for auto-bandwidth-adjustment of MPLS TE
management.
events: Specifies debugging for MPLS TE management events.
fast-reroute: Specifies debugging for fast reroute of MPLS TE management.
link-administration: Specifies debugging for link administration of MPLS TE management.
reoptimization: Specifies debugging for reoptimization of MPLS TE management.
states: Specifies debugging for MPLS TE management states.
Examples
The following examples are based on the scenario in which two directly-connected devices have been
enabled with MPLS basic capability, MPLS TE basic capability, and MPLS RESV-TE capability.
# Execute the debugging mpls te management auto-bandwidth-adjustment command. Then the two
devices establish an RSVP-TE tunnel.
<Sysname> debugging mpls te management auto-bandwidth-adjustment
*Nov 13 14:20:04:832 2006 Sysname LSPM/7/LSPM TE AUTOBW:
Received Global AutoBw enable event.
// MPLS TE management received a global automatic bandwidth adjustment enable event.
*Nov 13 14:20:04:832 2006 Sysname LSPM/7/LSPM TE AUTOBW:
AutoBw timer created for Tunnel : Tunnel0.
// MPLS TE management created an automatic bandwidth adjustment timer for Tunnel 0.
*Nov 13 14:20:05:740 2006 Sysname LSPM/7/LSPM TE AUTOBW:
AutoBw Timer expired for Tunnel : Tunnel0.
// Automatic bandwidth adjustment timer for Tunnel 0 has expired.
*Nov 13 14:20:05:740 2006 Sysname LSPM/7/LSPM TE AUTOBW:
Lsp Agt triggered to collect sample for Tunnel Tunnel0.
// LSP agent has been triggered to collect samples for Tunnel 0.
*Nov 13 14:20:05:740 2006 Sysname LSPM/7/LSPM TE AUTOBW:
Sample collected for Tunnel : Tunnel0.
// Sample has been collected for Tunnel 0.
# Execute the debugging mpls te management events command. Then the two devices establish an
RSVP-TE tunnel.
<Sysname> debugging mpls te management events
*Nov 13 14:24:56:141 2006 Sysname LSPM/7/LSPM TE EVENTS:
Received Tunnel create event.
// MPLS TE management received a tunnel create event.
*Nov 13 14:24:56:255 2006 Sysname LSPM/7/LSPM TE EVENTS:
Cspf calculated path for Tunnel : Tunnel0 is received.
// MPLS TE management received the path calculated by CSPF for Tunnel 0.
76