HP Comware 5 Debug Manual Vol 3

*Nov 13 14:24:56:848 2006 Sysname LSPM/7/LSPM TE EVENTS:
Main Crlsp is Up for Tunnel : Tunnel0.
// The main CR-LSP for Tunnel 0 is up.
# Execute the debugging mpls te management fast-reroute command. Then the two devices establish an
RSVP-TE tunnel.
<Sysname> debugging mpls te management fast-reroute
*Nov 13 14:28:10:424 2006 Sysname LSPM/7/LSPM TE FRR:
The interface has been added for bypass tunnel (Tunnel1) to protect.
// The interface has been successfully added and is to be protected by the bypass tunnel.
# Execute the debugging mpls te management reoptimization command. Then the two devices establish
an RSVP-TE tunnel.
<Sysname> debugging mpls te management reoptimization
*Nov 13 14:31:11:674 2006 Sysname LSPM/7/LSPM TE REOPT:
Reoptimization timer created for Tunnel : Tunnel1.
// MPLS TE management created a reoptimization timer for Tunnel 1.
*Nov 13 14:31:15:586 2006 Sysname LSPM/7/LSPM TE REOPT:
Reoptimization Timer expired for Tunnel : Tunnel1.
// Reoptimization timer for Tunnel 1 has expired.
*Nov 13 14:31:15:586 2006 Sysname LSPM/7/LSPM TE REOPT:
Reoptimizing Crlsp for Tunnel : Tunnel1.
// MPLS TE management is re-optimizing CR-LSP for Tunnel 1.
*Nov 13 14:31:15:602 2006 Sysname LSPM/7/LSPM TE REOPT:
Reoptimization triggered successfully for Tunnel : Tunnel1.
// Reoptimization has been triggered successfully for Tunnel 1.
*Nov 13 14:31:15:782 2006 Sysname LSPM/7/LSPM TE REOPT:
Reoptimization timer created for Tunnel : Tunnel1.
// MPLS TE management created a reoptimization timer for Tunnel 1.
*Nov 13 14:31:15:782 2006 Sysname LSPM/7/LSPM TE REOPT:
Cspf calculated Path for reoptimization for Tunnel : Tunnel1, is not optimal.
// Path calculated by CSPF for reoptimization of Tunnel 1 is not optimal.
# Execute the debugging mpls te management states command. Then the two devices establish an
RSVP-TE tunnel.
<Sysname> debugging mpls te management states
*Nov 13 14:42:34:586 2006 Sysname LSPM/7/LSPM TE STATES:
State Change :Tunnel Tunnel1 enters USINGIDLE state.
// State change: Tunnel 1 entered the USINGIDLE state.
*Nov 13 14:42:34:586 2006 Sysname LSPM/7/LSPM TE STATES:
State Change :Tunnel Tunnel1 enters WAITFORCSPF state from a USINGIDLE state.
// State change: Tunnel 1 entered the WAITFORCSPF state from the USINGIDLE state.
*Nov 13 14:42:34:728 2006 Sysname LSPM/7/LSPM TE STATES:
State Change :Tunnel Tunnel1 enters SETUPING state from WAITFORCSPF state.
// State change: Tunnel 1 entered the SETUPING state from the WAITFORCSPF state.
[Sysname-Tunnel1]
77