HP Comware 5 Debug Manual Vol 3

Old event:
Working path flag: 1
Protection path flag: 1
Switch result: 0
Message: 0x0(0,0)
--------before processing-------------
// The protection group was enabled to process the event. This is the protection group's status before
processing.
*Feb 22 16:52:53:969 2011 PE1 PSC/7/PROC: Real-time back up: PG 1, WTnlId 79101954, PTnlId
4294967295, Action 1.
// Status changed. The device performed real-time backup for the protection group.
*Feb 22 16:52:53:985 2011 PE1 PSC/7/PROC:
--------after processing-------------
Instance: 0
PG ID: 1
State: UNAVAILABLE
Old event:
Working path flag: 0
Protection path flag: 1
Switch result: 0
Message: 0x0(0,0)
--------after processing-------------
debugging ospf mpls-te
Use debugging ospf mpls-te to enable OSPF TE debugging.
Use undo debugging ospf mpls-te to disable OSPF TE debugging.
Syntax
debugging ospf [ process-id ] mpls-te
undo debugging ospf [ process-id ] mpls-te
Default
OSPF TE debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
OSPF TE debugging displays TE LSA receiving, forming, proliferation, and update events.
If no OSPF process number is specified, TE debugging information for all OSPF processes will be output.
79