HP Comware 5 Debug Manual Vol 3

MSDP debugging commands
Support for VPN instances depends on your device model.
The output description tables in this document only contain fields and messages that require an
explanation.
debugging msdp
Use debugging msdp to enable MSDP debugging.
Use undo debugging msdp to disable MSDP debugging.
Syntax
debugging msdp [ all-instance | vpn-instance vpn-instance-name ] { all | connect | event | packet |
source-active }
undo debugging msdp [ all-instance | vpn-instance vpn-instance-name ] { all | connect | event | packet
| source-active }
Default
MSDP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance. The VPN instance name must be a
case-sensitive string of 1 to 31 characters and must not contain any spaces.
all: Specifies all types of MSDP debugging.
connect: Specifies debugging for MSDP peer connection resets.
event: Specifies MSDP event debugging.
packet: Specifies MSDP packet debugging.
source-active: Specifies debugging for active sources of MSDP.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command enables MSDP debugging on the
public network.
Table 1 describes output fields and messages for the debugging msdp event command.
81