HP Comware 5 Debug Manual Vol 3

undo debugging mfib [ all-instance | vpn-instance vpn-instance-name ] { all | { driver | no-cache |

packet | register | route | sync | upcall | wrong-iif } [ advanced-acl-number ] } [ slot slot-number ]

Distributed IRF devices:

debugging mfib [ all-instance | vpn-instance vpn-instance-name ] { all | { driver | no-cache | packet |

slot-number ]

undo debugging mfib [ all-instance | vpn-instance vpn-instance-name ] { all | { driver | no-cache |

packet | register | route | sync | upcall | wrong-iif } [ advanced-acl-number ] } [ chassis chassis-number

slot slot-number ]

Default

MFIB debugging is disabled.

Views

User view

Default command level

1: Monitor level

Parameters

all-instance: Specifies all the MPLS L3VPN instances.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name. The VPN instance

name must be a case-sensitive string of 1 to 31 characters and must not contain any spaces.

all: Specifies all types of debugging for MFIB.

driver: Specifies MFIB debugging for interface drivers.

no-cache: Specifies MFIB debugging for unknown multicast packets.

packet: Specifies MFIB packet debugging.

route: Specifies MFIB route debugging.

sync: Specifies MFIB debugging for synchronization messages.

upcall: Specifies debugging for messages that MFIB reported to MRM.

wrong-iif: Specifies MFIB debugging for incoming interface (IIF) errors.

advanced-acl-number: Specifies an advanced ACL number in the range of 3000 to 3999.

slot slot-number: Specifies a card by its slot number. (Distributed devices.)

slot slot-number: Specifies an IRF member device by its member ID. (Centralized IRF devices.)

chassis chassis-number

slot

slot-number: Specifies a card on an IRF member device. The chassis-number

argument specifies the IRF member device ID. The slot-number argument specifies the number of the slot

where the card resides. (Distributed IRF devices.)

Usage guidelines

If neither all-instance nor vpn-instance is specified, this command enables MFIB debugging for the

public network.

Table 2 describes output fields and messages for the debugging mfib driver command.