HP Comware 5 Debug Manual Vol 3

Table 65 Output from the debugging mfib register command
Field
Description
Send register The MFIB sent a register message.
(sadd, gadd) (S, G) entry.
Dropping received register packet The MFIB dropped error register messages.
Table 6 describes output fields and messages for the debugging mfib route command.
Table 66 Output from the debugging mfib route command
Field
Description
add-entry message
The MFIB received an add-entry message from the
multicast routing module (MRM).
del-entry message The MFIB received a del-entry message from MRM.
set-IIF message The MFIB received a set-IIF message from MRM.
del-OIF message The MFIB received a del-OIF message from MRM.
add-OIF message The MFIB received an add-OIF message from MRM.
MRM Multicast routing module.
The Following OIFs are added The following outgoing interfaces were added.
(sadd, gadd) (S, G) entry.
Add/Delete entry successfully
The data plane successfully added or deleted an entry
(supported only by multi-core devices).
Add/Delete num OIF(s)
The data plane entry successfully added or deleted
outgoing interfaces, the number of which is specified
by num (supported only by multi-core devices).
Set Switch-Group successfully
The data plane entry successfully configured
switch-group (supported only by multi-core devices).
Table 7 describes output fields and messages for the debugging mfib sync command.
Table 67 Output from the debugging mfib sync command
Field
Description
added to updated list The MFIB added an entry to the updated list.
deleted from updated list The MFIB deleted an entry from the updated list.
Encoded the ADD/DEL/MOD message
The MFIB encapsulated a message to
add/delete/modify an entry.
(sadd, gadd) (S, G) entry.
Table 8 describes output fields and messages for the debugging mfib upcall command.
Table 68 Output from the debugging mfib upcall command
Field
Description
Send No cache up call The MFIB sent a message to MRM.
89