HP HSR6800 Router Series FAQ © Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Contents Hardware ..................................................................................................................................................... 3 Q. What models does the HSR6800 Router Series include? ................................................................ 3 Q. What MPUs, switching fabric modules, and FIP/SAP/OAP modules are supported on the router? ...............................................................................................................................
Q. Do GE combo interfaces on the FIP-310 service module support 100 Mbps SFP transceivers and 100/1000 Mbps SFP transceivers? ..................................................................... 6 Q. What is the connector type for SFP+ ports on the FIP-310 service module? ....................................... 6 Q. Do the SFP+ ports on the FIP-310 service module support the 1000 Mbps mode? .............................. 6 Q. What is the connector type for SFP+ ports on the SAP-4EXP service module?........
HP HSR6800 Router Series FAQ Hardware This section contains the most frequently asked questions about the router hardware. Q. What models does the HSR6800 Router Serie三s include? A. The HSR6800 Router Series includes HSR6802, HSR6804, and HSR6808.
You can use 650W/1200W AC or 650W/1200W DC power supplies on the router, but the installed power supplies must be the same model. Q. Can I use the LSQM1AC650/LSQM1DC650 power supply on the HSR6808 router? A. No. The HSR6808 router must use the AC-PSR650-A-H3 or the DC-PSR650-D-H3 power supply. Q. Are the power supplies of the router hot swappable? A. Yes. Before you hot swap a power supply, make sure the power switch of the power supply is off.
Q. What are the switching capacity and packet forwarding rate of the router? A. The switching capacity and the packet forwarding rate are as follows: Item HSR6802 HSR6804 HSR6808 Switching capacity 1024 Gbps 1024 Gbps 2048 Gbps Packet forwarding rate 240 Mpps 480 Mpps 960 Mpps Q. Can I use transceiver modules that are not certified by HP on the router? A. To guarantee the functionality of the ports on the router, use only HP-certified transceiver modules. Q.
Q. Under what conditions must I install the switching fabric module SFE-X1 in an HSR6808 router? A. If multiple SAP-4EXP service modules are installed in an HSR6808 router, one SFE-X1 is required to ensure high-performance forwarding among the SAP-4EXP service modules. The SFE-X1 is installed only in slot 6 on the HSR6808 router. Q. What does the LED on the SFE-X1 indicate? A. The LED indicates the operating status of the SFE-X1. Q. Is SFE-X1 hot swappable? A. Yes.
A. The SAP-4EXP SFP+ ports support the LC connectors. Q. Do the SFP+ ports on the SAP-4EXP service module support the 1000 Mbps mode? A. No. Q. Does the router support MPUs RPE-X1 or RSE-X1? A. No. Q. Does the router support MPUs MCP-X1 or MCP-X2? A. No. Q. Does the router support service modules FIP-10 or FIP-20? A. No. Q. What are the interface modules that are compatible with the service modules of an HSR6800 router? A.
Interface modules FIP-110 FIP-210/300/310 FIP-600 RT-MIM-1CE3-V2-H3 √ √ × RT-MIM-1CT3-V2-H3 √ √ × RT-MIM-8E1(75)-H3 √ √ × RT-MIM-8E1-F(75)-H3 √ √ × RT-MIM-8T1-H3 √ √ × RT-MIM-8T1-F-H3 √ √ × Operation and maintenance This section contains the most frequently asked questions about the router operation and maintenance. Q. What should I do when the CF card on the MPU is reading or writing data? A.
