HP HSR6800 Router Series FAQ

3
HP HSR6800 Router Series FAQ
Hardware
This section contains the most frequently asked questions about the router hardware.
Q. What models does the HSR6800 Router Serie
三
s include?
A. The HSR6800 Router Series includes HSR6802, HSR6804, and HSR6808.
The following table describes the slot arrangement for the HSR6800 Router Series:
Model
MPU slots
FIP/SAP/OAP module slots
Switching fabric module slots
HSR6802 2 (slot 0 and slot 1) 2 (slot 2 and slot 3) N/A
HSR6804 2 (slot 0 and slot 1) 4 (slot 2 and slot 5) N/A
HSR6808 2 (slot 4 and slot 5)
8 (slot 0 through slot 3, slot 7 through
slot 9, and slot 6)
1 (slot 6)
NOTE:
Slot 6 of the
HSR6808 router can be installed with a switching fabric module, or a FIP, SAP, or OAP
module.
Q. What MPUs, switching fabric modules, and FIP/SAP/OAP modules are supported on the router?
A. The following table describes the MPUs, switching fabric modules, and FIP/SAP/OAP modules supported on
the router:
Model
MPU
Switching fabric module
FIP
SAP
OAP
HSR6802
HSR6804
HSR6808
RSE-X2
SFE-X1 (supported only on the
HSR6808)
FIP-110
FIP-210
FIP-300
FIP-310
FIP-600
SAP-48GBE
SAP-24GBP
SAP-48GBP
SAP-4EXP
SPE-FWM-200
SPE-SSL-200
SPE-IPS-200
SPE-ACG-200
Q. Can I use different models of power supplies on the router?
A. No.
Each of the HSR6802 and the HSR6804 routers has two power supply slots at the chassis bottom. You can
install two power supplies for redundancy.
An HSR6608 router has four power supply slots at the chassis bottom. HP recommends that you install at
least two power supplies to meet the power consumption needs of the router. For redundancy, install three or
four power supplies on the router.