HP HSR6800 Router Series FAQ

6
Q. Under what conditions must I install the switching fabric module SFE-X1 in an HSR6808 router?
A. If multiple SAP-4EXP service modules are installed in an HSR6808 router, one SFE-X1 is required to ensure
high-performance forwarding among the SAP-4EXP service modules. The SFE-X1 is installed only in slot 6 on
the HSR6808 router.
Q. What does the LED on the SFE-X1 indicate?
A. The LED indicates the operating status of the SFE-X1.
Q. Is SFE-X1 hot swappable?
A. Yes. Execute the remove slot num command before you unplug the SFE-X1.
Q. How many slots does the FIP-600 service module provide? What types of interface modules are installed in the
slots?
A. The FIP-600 service module provides two slots. The slots support the HIM interface module.
Q. Do the combo interfaces on the FIP-600 service module support 100 Mbps or 100/1000 Mbps SFP
transceivers?
A. The combo interfaces on the FIP-600 service module support only 1000 Mbps SFP transceivers.
Q. How many slots do FIP-300 and FIP-301 service modules provide? What types of interface modules are
installed in the slots?
A. The FIP-300 and FIP-301 service modules each provide two slots. The slots support the HIM and MIM
interface modules.
Q. How many combo interfaces does the FIP-300 service module provide?
A. The FIP-300 provides 12 GE combo interfaces.
Q. How many 10GE fiber ports and GE combo interfaces does the FIP-310 service module provide?
A. The FIP-300 provides two 10GE SFP+ fiber ports and four GE combo interfaces.
Q. Do GE combo interfaces on the FIP-310 service module support 100 Mbps SFP transceivers and 100/1000
Mbps SFP transceivers?
A. The combo interfaces on the FIP-310 engine support only 1000 Mbps SFP transceivers.
Q. What is the connector type for SFP+ ports on the FIP-310 service module?
A. The FIP-310 SFP+ ports support LC connectors.
Q. Do the SFP+ ports on the FIP-310 service module support the 1000 Mbps mode?
A. No.
Q. What is the connector type for SFP+ ports on the SAP-4EXP service module?