HP HSR6800 Router Series - HP HSR6800-CMW520-R3103P04-RU Release Notes

15
Management &
maintenance
Configuration at the CLI
Configuration through the console port
Telnet for configuration and remote maintenance through Ethernet port
Dialing up for configuration and remote maintenance via Modem through AUX port
SNMP v1/v2c/v3
RMON (group 1, 2, 3 and 9 MIB)
System logs
Hierarchical alarms
Ping and Tracert
Fan status detection, maintenance, and alarming
Power supply status detection, maintenance, and alarming
CF card status detection and maintenance
Temperature detection and alarming
File systems
FAT format
CF card
USB storage device
Dual image
Uploading/upgra
ding
Loading/upgrading through the XModem protocol
Loading/upgrading through FTP, and TFTP
Appendix B Upgrading software
This section describes how to upgrade system software while the router is operating normally or when the
router cannot correctly start up.
System software file types
System software images are in .bin format (for example, main.bin) and run at startup. You can set a
system software image as a main, backup, or secure image.
At startup, the router always attempts to boot first with the main system software image. If the attempt fails,
for example, because the image file is corrupted, the router tries to boot with the backup system software
image. If the attempt still fails, the router tries to boot with the secure system software image. If all attempts
fail, the router displays a failure message.
Upgrade methods
You can upgrade system software by using one of the following methods: