HP HSR6800 Router Series - HP HSR6800-CMW520-R3103P04-RU Release Notes

27
Protocol (FTP or TFTP) :tftp
Load File Name :main.bin
:
Target File Name :main.bin
:
Server IP Address :192.168.1.2
Local IP Address :192.168.1.1
Gateway IP Address :0.0.0.0
FTP User Name :user
FTP User Password :password
Table 12 Network parameter fields and shortcut keys
Field
Description
'.' = Clear field
Press a dot (.) and then Enter to clear the setting for a field.
'-' = Go to previous field
Press a hyphen (-) and then Enter to return to the previous field.
Ctrl+D = Quit
Press Ctrl + D to exit the Ethernet Parameter Set menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to FTP or TFTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file on the router. By default, the target file
name is the same as the source file name.
Server IP Address
Set the IP address of the FTP or TFTP server. If a mask must be set, use
a colon (:) to separate the mask length from the IP address. For
example, 192.168.1.2:24.
Local IP Address
Set the IP address of the router.
Gateway IP Address
Set a gateway IP address if the router is on a different network than the
server.
FTP User Name
Set the username for accessing the FTP server. This username must be
the same as configured on the FTP server. This field is not available for
TFTP.
FTP User Password
Set the password for accessing the FTP server. This password must be
the same as configured on the FTP server. This field is not available for
TFTP.
3. Select an option in the Ethernet submenu to upgrade a system software image. For example, enter 2
to upgrade the main system software image.
Loading.....................................................................
............................................................................
.........................Done!
17404928 bytes downloaded!
Updating File cfa0:/main.bin...............................................
....................................................Done!
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |