HP HSR6800 Router Series - HSR6800-CMW520-R3103P01 Release Notes

Upgrading the system software

1. Perform the get command in FTP client view to download the system software image file HSR6800

-CMW520-R3103.bin to the CF card on the router.

[ftp] get HSR6800-CMW520-R3103.bin

227 Entering passive mode (192,168,1,2,16,71)

125 Using existing data connection

226 Closing data connection; File transfer successful.

FTP: 17404928 byte(s) received in 35.685 second(s), 487.00K byte(s)/sec.

[ftp]

2. Perform the quit command in FTP client view to return to user view.

[ftp]quit

221 Service closing control connection

3. Perform the boot-loader command in user view to load the file HSR6800 -CMW520-R3103.bin

and specify the file as the main image file at the next reboot.

<Sysname> boot-loader file HSR6800-CMW520-R3103.bin main

This command will set the boot file. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on slot

4. Perform the display boot-loader command in user view to verify that the file has been loaded.

<Sysname> display boot-loader

The boot file used at this reboot:cfa0:/main.bin attribute: main

The boot file used next time:cfa0:/HSR6800 -CMW520-R3103.bin attribute: main

The boot file used next time:cfa0:/HSR6800.bin attribute: backup

Failed to get the secure boot file used next time!

5. Perform the reboot command in user view to reboot the router.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

#Nov 29 15:38:59:822 2012 HSR6800 DEVM/1/REBOOT:

Reboot device by command.

%Nov 28 15:03:10:897 2012 HSR6800 DEVM/5/SYSTEM_REBOOT: System is rebooting now.

System is starting...

6. After the reboot is complete, perform the display version command to verify that the system software

image is correct.

<Sysname>display version

HP Comware Platform Software

Comware Software, Version 5.20.106, Release 3103