R3303-HP HSR6800 Routers ACL and QoS Command Reference

98
Related commands
• qos cql default-queue
• qos cql protocol
• qos cql queue serving
• qos cq
qos cql queue serving
Use qos cql queue serving to set the byte count for a custom queue on a CQ list.
Use undo qos cql queue serving to restore the default.
Syntax
qos cql cql-index queue queue-number serving byte-count
undo qos cql cql-index queue queue-number serving
Views
System view
Default command level
2: System level
Parameters
cql-index: CQ list index in the range of 1 to 16.
queue-number: Queue number in the range of 1 to 16.
byte-count: Number of bytes of packets that the specified queue sends in each cycle of queue scheduling.
The value range is 1 to 16777215 bytes, and the default is 1500 bytes.
Examples
# Set the byte count of packets to 1400 for queue 2 on CQ list 5.
<Sysname> system-view
[Sysname] qos cql 5 queue 2 serving 1400
Related commands
• qos cql default-queue
• qos cql protocol
• qos cql queue
• qos cq
WFQ commands
display qos wfq interface
Use display qos wfq interface to display weighted fair queuing (WFQ) configuration and statistics of an
interface or all interfaces.