R3303-HP HSR6800 Routers ACL and QoS Command Reference

99
Syntax
display qos wfq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the WFQ configuration and statistics of all the
interfaces.
If a VT interface is specified, this command displays QoS WFQ information of all VA interfaces inheriting
the VT interface, but does not display QoS information about the VT interface.
Examples
# Display the WFQ configuration and statistics of GigabitEthernet 1/0/1.
<Sysname> display qos wfq interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (Weighted Fair queuing : Size/Length/Discards) 0/64/0
Hashed by IP Precedence
Hashed queues: 0/0/128 (Active/Max active/Total)
Table 32 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Output queue Information about the current output queue.
Size Number of packets in the queue.
Length Queue length.
Discards Number of dropped packets.
Hashed by Weight type: IP precedence or DSCP.
Hashed queues Information about hashed queues.
Active Number of active hashed queues.