R3303-HP HSR6800 Routers ACL and QoS Command Reference

117
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the WRR queuing configuration of all the interfaces.
Examples
# Display the WRR queuing configuration of GigabitEthernet 1/0/1.
<Sysname> display qos wrr interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue: Weighted round robin queue
Queue ID Group Weight
---------------------------------------------
0 2 100
1 1 1
2 1 1
3 1 1
4 1 1
5 1 1
6 1 1
7 sp N/A
Table 36 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Output queue Pattern of the current output queue.
Queue ID ID of a queue.
Group Number of the group a queue is assigned to. All queues belong to group 1.
Weight
Queue weight based on which queues are scheduled. N/A indicates that the queue
uses the SP queue scheduling algorithm.
Related commands
qos wrr