R3303-HP HSR6800 Routers ACL and QoS Command Reference

120
Table 37 Default weight values for queues
Queue Wei
g
ht
0 1
1 2
2 3
3 4
4 5
5 6
6 7
7 8
Usage guidelines
Settings in interface view take effect on the current interface. Settings in port group view take effect on all
ports in the port group.
Examples
# Enable packet-based WRR queuing on GigabitEthernet 1/0/1, and assign queue 0, with the
scheduling weight 100, to WRR group 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr weight
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group 1 weight 100
Related commands
• display qos wrr interface
• qos wrr
WFQ commands
display qos wfq interface
Use display qos wfq interface to display the weighted fair queuing (WFQ) configuration on an interface.
Syntax
display qos wfq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.