R3303-HP HSR6800 Routers ACL and QoS Command Reference

125
Usage guidelines
You can define only one EF or AF action in a traffic behavior. The EF and AF actions can overwrite each
other, whichever is last configured.
If CBS is not set in the queue ef command, it equals bandwidth × 25.
When associating AF and EF traffic behaviors with classes in a policy, make sure that the total bandwidth
assigned in the behaviors is no more than the maximum available bandwidth of the interface where the
policy is to be applied.
Examples
# Enable EF, and set the maximum bandwidth to 200 kbps and CBS to 5000 bytes in traffic behavior
database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] queue ef bandwidth 200 cbs 5000
Related commands
• qos policy
• traffic behavior
• classifier behavior
queue wfq
Use queue wfq to configure WFQ in a traffic behavior.
Use undo queue wfq to delete the configuration from a traffic behavior.
Syntax
queue wfq
undo queue wfq
Views
Traffic behavior view
Default command level
2: System level
Examples
# Configure WFQ in traffic behavior test.
<Sysname> system-view
[Sysname] traffic behavior test
[Sysname-behavior-test] queue wfq
Related commands
• qos policy
• traffic behavior
• classifier behavior