R3303-HP HSR6800 Routers ACL and QoS Command Reference

143
Default command level
2: System level
Parameters
inbound: Sets the CIR ALLOW for the incoming packets. This argument is available when FR traffic
policing is enabled on interfaces.
outbound: Sets the CIR ALLOW for the outgoing packets. This argument is available when FR traffic
policing is enabled on interfaces.
committed-information-rate: CIR ALLOW in the range of 1000 to 45000000 bps. The CIR ALLOW is
56000 bps by default.
Usage guidelines
CIR ALLOW is the transmit rate that an FR PVC can provide when no congestion occurs to the network.
If the packet direction is not specified, the CIR ALLOW is effective for both incoming packets and
outgoing packets.
CIR ALLOW must be greater than CIR.
Examples
# Set CIR ALLOW to 64000 bps for the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cir allow 64000
Related commands
• cbs
• ebs
• cir
congestion-threshold
Use congestion-threshold to enable congestion management for FR PVCs.
Use undo congestion-threshold to disable the congestion management function.
Syntax
congestion-threshold { de | ecn } queue-percentage
undo congestion-threshold { de | ecn }
Default
The congestion management function is disabled for FR PVCs.
Views
FR class view
Default command level
2: System level
Parameters
de: Drops FR packets with the DE flag bit 1 when congestion occurs.