R3303-HP HSR6800 Routers ACL and QoS Command Reference

148
<Sysname> display fr switch-table all
Total PVC switch records:2
PVC-Name Status Interface(Dlci) <-----> Interface(Dlci)
a Inactive Pos4/1/0(50) Pos4/1/1(50)
b Active Pos5/2/1(40) Pos5/2/3(50)
Table 44 Command output
Field Descri
p
tion
PVC-Name Name of a switching PVC.
Status Connection state of the frame relay switching link.
Interface
The first interface represents a local interface, and the second interface represents a
peer interface.
DLCI The first DLCI represents a local DLCI, and the second DLCI represents a remote DLCI.
Related commands
fr switch
ebs
Use ebs to set the EBS for the FR PVCs.
Use undo ebs to restore the default.
Syntax
ebs [ inbound | outbound ] excess-burst-size
undo ebs [ inbound | outbound ]
Views
FR class view
Default command level
2: System level
Parameters
inbound: Sets the EBS for the incoming packets. This argument is available when FR traffic policing is
enabled on interfaces.
outbound: Sets the EBS for the outgoing packets. This argument is available when FR traffic policing is
enabled on interfaces.
excess-burst-size: EBS in the range of 0 to 16000000 bits. The default value of EBS is 0 bits.
Usage guidelines
EBS is the maximum amount of traffic, except CBS, that can be transmitted in the interval of Tc. When
congestion occurs to the network, the excess traffic is dropped preferentially.
If neither the inbound keyword nor the outbound keyword is specified for this command, the EBS is
effective for both incoming packets and outgoing packets.
Examples
# Set the EBS to 32000 bits for the FR class test1.