R3303-HP HSR6800 Routers ACL and QoS Command Reference

149
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] ebs 32000
Related commands
• cbs
• cir allow
• cir
fifo queue-length
Use fifo queue-length to set the FIFO queue length for FR PVCs.
Use undo fifo queue-length to restore the default.
Syntax
fifo queue-length queue-length
undo fifo queue-length
Views
FR class view
Default command level
2: System level
Parameters
queue-length: FIFO queue length, which specifies the maximum number of packets that a FIFO queue
can hold. The value range for this argument is 1 to 1024, and the default is 40.
Usage guidelines
Set the FIFO queue length for a DLCI if the device functions as the DCE and an FR class is applied to the
DLCI.
Examples
# Set the FIFO queue length to 80 for the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fifo queue-length 80
Related commands
fr class
fr class
Use fr class to create an FR class and enter FR class view.
Use undo fr class to remove the specified FR class.
Syntax
fr class class-name
undo fr class class-name