R3303-HP HSR6800 Routers ACL and QoS Command Reference

154
Examples
# Add a rule that sets the DE flag bits of all the FR packets encapsulated with IP packets to 1 to DE rule
list 1.
<Sysname> system-view
[Sysname] fr del 1 protocol ip
Related commands
• fr de del
• fr del inbound-interface
fr traffic-policing
Use fr traffic-policing to enable FR traffic policing.
Use undo fr traffic-policing to disable FR traffic policing.
Syntax
fr traffic-policing
undo fr traffic-policing
Views
FR interface view, MFR interface view
Default command level
2: System level
Usage guidelines
FR traffic policing is applicable only to the ingress interfaces on the DCE side of an FR network.
Before enabling traffic policing for the incoming interfaces, make sure FR switching is enabled on the
DCE globally by using the fr switching command. For more information about the fr switching command,
see Layer 2—WAN Command Reference.
Examples
# Enable traffic policing on Serial 2/0/1.
<Sysname> system-view
[Sysname] interface Serial 2/0/1
[Sysname-Serial2/0/1] fr traffic-policing
Related commands
fr class
fr traffic-shaping
Use fr traffic-shaping to enable FRTS.
Use undo fr traffic-shaping to disable FRTS.
Syntax
fr traffic-shaping
undo fr traffic-shaping