R3303-HP HSR6800 Routers ACL and QoS Command Reference

155
Default
FRTS is disabled.
Views
FR interface view, MFR interface view
Default command level
2: System level
Usage guidelines
FRTS is applied to the outgoing interfaces and are usually applied to the DCE of an FR network.
Examples
# Enable FRTS on Serial 2/0/1.
<Sysname> system-view
[Sysname] interface Serial 2/0/1
[Sysname-Serial2/0/1] fr traffic-shaping
Related commands
• fr class
• fr-class
• fr dlci (Layer 2—WAN Command Reference)
fragment
Use fragment to enable the packet fragmentation function (conforming to frame relay forum's FRF.12) for
FR PVCs.
Use undo fragment to disable the packet fragmentation function.
Syntax
fragment [ fragment-size ]
undo fragment
Default
The packet fragmentation function is disabled for FR PVCs.
Views
FR class view
Default command level
2: System level
Parameters
fragment-size: Fragment size in the range of 16 bytes to 1600 bytes. This argument is 45 bytes by default.
Usage guidelines
If neither data-level nor voice-level is specified, the fragment size is specified for data packets.
Examples
# Enable the packet fragmentation function with the fragment size of 128 bytes for the FR class test1.
<Sysname> system-view