R3303-HP HSR6800 Routers ACL and QoS Command Reference

32
step
Use step to set a rule numbering step for an ACL. The rule numbering step sets the increment by which the
system numbers rules automatically. For example, the default ACL rule numbering step is 5. If you do not
assign IDs to rules you are creating, they are numbered 0, 5, 10, 15, and so on. The wider the numbering
step, the more rules you can insert between two rules. Whenever the step changes, the rules are
renumbered, starting from 0. For example, if there are five rules numbered 5, 10, 13, 15, and 20,
changing the step from 5 to 2 causes the rules to be renumbered 0, 2, 4, 6, and 8.
Use undo step to restore the default.
Syntax
step step-value
undo step
Default
The rule numbering step is 5.
Views
IPv4 basic/advanced ACL view, IPv6 basic/advanced ACL view, Ethernet frame header ACL view
Default command level
2: System level
Parameters
step-value: ACL rule numbering step in the range of 1 to 20.
Usage guidelines
After you restore the default numbering step by using the undo step command, the rules are renumbered
in steps of 5.
Examples
# Set the rule numbering step to 2 for IPv4 basic ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] step 2
# Set the rule numbering step to 2 for IPv6 basic ACL 2000.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] step 2
Related commands
• display acl
• display acl ipv6
time-range
Use time-range to configure a time range. If you provide an existing time range name, the command
adds a statement to the time range.
Use undo time-range to delete a time range or a statement in the time range.