R3303-HP HSR6800 Routers ACL and QoS Command Reference

54
Usage guidelines
This command is supported only on SAP modules operating in bridge mode.
Examples
# Configure traffic behavior database to mark matching traffic with local precedence 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark local-precedence 2
Related commands
• qos policy
• traffic behavior
• classifier behavior
remark qos-local-id
Use remark qos-local-id to configure the action of setting the specified QoS-local ID for packets.
Use undo remark qos-local-id to delete the action.
Syntax
remark qos-local-id local-id-value
undo remark qos-local-id
Views
Traffic behavior view
Default command level
2: System level
Parameters
local-id-value: Sets the QoS-local ID to be marked for packets, in the range of 1 to 4095.
Examples
# Configure the action of marking packet with QoS-local ID 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark qos-local-id 2
traffic behavior
Use traffic behavior to create a traffic behavior and enter traffic behavior view.
Use undo traffic behavior to delete a traffic behavior.
Syntax
traffic behavior behavior-name
undo traffic behavior behavior-name
Views
System view