R3303-HP HSR6800 Routers ACL and QoS Command Reference

75
Traffic policing, GTS, and rate limit commands
Traffic policing commands
display qos car interface
Use display qos car interface to display the CAR settings and operational statistics on a specified
interface.
Syntax
display qos car interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the CAR settings and operational statistics on all the
interfaces.
If a VT interface is specified, this command displays QoS CAR information of all VA interfaces inheriting
the VT interface, but does not display QoS information about the VT interface.
Examples
# Display the CAR settings and operational statistics on GigabitEthernet 1/0/1.
<Sysname> display qos car interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Direction: Inbound
Rule(s): If-match Any
CIR 10 (kbps), CBS 2000 (byte), EBS 0 (byte)
Green Action: pass
Red Action : discard
Green : 0(Packets) 0(Bytes)