R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

98
Configuring class-based accounting
Class-based accounting collects statistics (in number of packets or bytes) on a per-traffic class basis. For
example, you can define the action to collect statistics for traffic sourced from a certain IP address. By
analyzing the statistics, you can determine whether anomalies have occurred and what action to take.
Configuration procedure
To configure class-based accounting:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a class and enter
class view.
traffic classifier classifier-name [ operator
{ and | or } ]
N/A
3. Configure match criteria.
if-match [ not ] match-criteria N/A
4. Return to system view.
quit N/A
5. Create a behavior and
enter behavior view.
traffic behavior behavior-name N/A
6. Configure the accounting
action.
accounting
Optional.
The router supports
packet-based accounting.
7. Return to system view.
quit N/A
8. Create a policy and enter
policy view.
qos policy policy-name N/A
9. Associate the class with the
traffic behavior in the QoS
policy.
classifier classifier-name behavior
behavior-name
N/A
10. Return to system view.
quit N/A
11. Apply the QoS policy.
• Applying the QoS policy to an
interface or PVC
• Applying the QoS policy to a VLAN
Choose one of the application
destinations as needed.
Displaying and maintaining class-based
accounting
To verify the class-based accounting configuration, use the display qos policy command in any view to
display the traffic statistics collected after the configuration is complete.