R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

106
Figure 36 Network diagram
Device Interface IP address Device Interface IP address
Router A GE1/0/1 192.168.1.2/24 Router B GE1/0
/
1 167.1.1.2/24
GE1/0/2 167.1.1.1/24 S2/1/1 168.1.1.2/24
Router C GE1/0
/
1 169.1.1.2
/
24 Router D GE1/0
/
2 169.1.1.1
/
24
S2
/
1
/
1 168.1.1.1/24 GE1/0
/
1 192.168.2.2/24
Configuration procedure
1. Configure IP addresses for each interface. (Details not shown.)
2. Configure Router A:
# Configure a BGP connection.
<RouterA> system-view
[RouterA] bgp 100
[RouterA-bgp] peer 167.1.1.2 as-number 200
[RouterA-bgp] import-route direct
[RouterA-bgp] quit
3. Configure Router B:
# Configure a VPN instance.
<RouterB> system-view
[RouterB] ip vpn-instance vpn1
[RouterB-vpn-instance-vpn1] route-distinguisher 200:1
[RouterB-vpn-instance-vpn1] vpn-target 200:1 export-extcommunity
[RouterB-vpn-instance-vpn1] vpn-target 200:1 import-extcommunity
[RouterB-vpn-instance-vpn1] quit
# Configure a BGP connection.
[RouterB] router id 1.1.1.1
[RouterB] bgp 200
[RouterB-bgp] peer 2.2.2.2 as-number 200
[RouterB-bgp] peer 2.2.2.2 connect-interface LoopBack0
[RouterB-bgp] ipv4-family vpn-instance vpn1
[RouterB-bgp-vpn1] peer 167.1.1.2 as-number 100
[RouterB-bgp-vpn1] quit
[RouterB-bgp] ipv4-family vpnv4
[RouterB-bgp-af-vpnv4] peer 2.2.2.2 enable
[RouterB-bgp-af-vpnv4] quit
[RouterB-bgp] quit
# Configure MPLS.
[RouterB] mpls lsr-id 1.1.1.1
[RouterB] mpls