R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

122
Ste
p
Command Remarks
8. Create a QoS policy and
enter QoS policy view.
qos policy policy-name N/A
9. Associate the traffic class with
the traffic behavior in the QoS
policy.
classifier classifier-name behavior
behavior-name
N/A
10. Return to system view.
quit N/A
11. Enter interface view or port
group view.
interface interface-type
interface-number
N/A
12. Apply the QoS policy to the
interface or port group.
qos apply policy policy-name
{ inbound | outbound }
N/A
Configuring MPLS congestion management
By configuring MPLS congestion management, you can assign packets exceeding the bandwidth to the
queues by priority, and then send these packets according to a certain queue scheduling mechanism,
avoiding dropping packets directly.
You can configure PQ and CQ for MPLS.
Configuration prerequisites
Complete basic MPLS configurations. For more information about basic MPLS configurations, see MPLS
Configuration Guide.
Configure MPLS PQ
Ste
p
Command
1. Enter system view.
system-view
2. Configure a PQ list.
qos pql pql-index protocol mpls exp exp-value-list queue { bottom |
middle | normal | top }
3. Enter interface view.
interface interface-type interface-number
4. Apply the PQ list to the
interface.
qos pq pql pql-index
Configure MPLS CQ