R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

148
Ste
p
Command Remarks
4. Configure a CAR
list based CAR
policy on the
interface.
qos car { inbound | outbound } carl carl-index
cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size ] ]
[ green action ] [ red action ]
N/A
5. Display the CAR
information on the
specified interface.
display qos car interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Configuring ACL-based traffic policing
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure an ACL.
See "Configuring ACLs." Configure rules for the ACL.
3. Enter interface view.
interface interface-type interface-number N/A
4. Configure an ACL
based CAR policy on
the interface or port
group.
qos car { inbound | outbound } acl [ ipv6 ]
acl-number cir committed-information-rate
[ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green action ]
[ red action ]
N/A
5. Display the CAR
information on the
specified interface.
display qos car interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Configuring traffic policing for all traffic
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number N/A
3. Configure a CAR
action for all traffic on
the interface.
qos car { inbound | outbound } any cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ green action ] [ red
action ]
N/A
4. Display the CAR
information on the
specified interface.
display qos car interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.