R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

20
Figure 5 QoS policy configuration procedure
Defining a class
The system predefines some classes and defines general match criteria for them. A user-defined class
cannot be named the same as a system-defined class. You can use these predefined classes when
defining a policy. The system-defined classes include:
• The default class
default-class: Matches the default traffic.
• DSCP-based predefined classes
ef, af1, af2, af3, af4: Matches IP DSCP value ef, af1, af2, af3, af4, respectively.
• IP precedence-based predefined classes
ip-prec0, ip-prec1, …ip-prec7: Matches IP precedence value 0, 1, …7, respectively.
• MPLS EXP-based predefined classes
mpls-exp0, mpls-exp1, …mpls-exp7: Matches MPLS EXP value 0, 1, …7, respectively.
To define a class:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A