R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

25
2. Apply the QoS policy to VLANs.
qos vlan-policy policy-name vlan vlan-id-list { inbound |
outbound }
Displaying and maintaining QoS policies
Task Command Remarks
Display a specified class-behavior
association in a specified policy or
all class-behavior associations in a
specified policy or in all policies.
display qos policy { system-defined |
user-defined } [ policy-name [ classifier
classifier-name] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display QoS policy configuration
on a specified interface or PVC or
all interfaces or PVCs (in
standalone mode).
display qos policy interface [ { interface-type
interface-number } [ slot slot-number ] ]
[ inbound | outbound ] [ pvc { pvc-name
[ vpi/vci ] | vpi/vci } ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display QoS policy configuration
on a specified interface or PVC or
all interfaces or PVCs (in IRF
mode).
display qos policy interface [ { interface-type
interface-number } [ chassis chassis-number slot
slot-number ] ] [ inbound | outbound ] [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about QoS
policies applied to VLANs (in
standalone mode).
display qos vlan-policy { name policy-name |
vlan vlan-id } [ slot slot-number ] [ inbound |
outbound ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
This command is
supported only on
SAP modules
operating in bridge
mode.
Display information about QoS
policies applied to VLANs (in IRF
mode).
display qos vlan-policy { name policy-name |
vlan [ vlan-id ] } [ chassis chassis-number slot
slot-number ] [ inbound | outbound ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
This command is
supported only on
SAP modules
operating in bridge
mode.
Display traffic behavior
configurations.
display traffic behavior { system-defined |
user-defined } [ behavior-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display traffic class configurations.
display traffic classifier { system-defined |
user-defined } [ classifier-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Clear the statistics of the QoS
policy applied to a VLAN.
reset qos vlan-policy [ vlan vlan-id ] [ inbound |
outbound ]
Available in user
view.
This command is
supported only on
SAP modules
operating in bridge
mode.
Display a specified class-behavior
association in a specified policy.
display qos policy user-defined [ policy-name
[ classifier classifier-name ] ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.