R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

74
• Configure queue scheduling in a QoS policy, as described in Configuring CBQ.
Complete the following tasks to achieve hardware congestion management:
Task Remarks
Configuring per-queue hardware
congestion management
Configuring SP queuing Optional.
Configure group-based WRR queuing Optional.
Configuring WFQ queuing Optional.
Configuring CBQ Optional.
Configuring per-queue hardware congestion
management
Configuring SP queuing
Configuration procedure
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view or
port group view.
• Enter interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
SP queuing is only applicable to Layer 2
interfaces.
Settings in interface view take effect on
the current interface. Settings in port
group view take effect on all ports in the
port group.
3. Configure SP queuing.
qos sp
By default, basic SP queuing is used.
Only Layer 2 Ethernet interfaces support
configuring SP queuing.
4. Display SP queuing
configuration.
display qos sp interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
Optional.
Available in any view.
Configuration example
1. Network requirements
Configure GigabitEthernet 1/0/1 to use SP queuing.
2. Configuration procedure
# Enter system view
<Sysname> system-view
# Configure GigabitEthernet1/0/1 to use SP queuing.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos sp