R3303-HP HSR6800 Routers ACL and QoS Configuration Guide

Figure 30 Network diagram

Configuration procedure

# Configure ACLs to match the packets from Server, Telephone, Host A, and Host B, respectively.

<Router> system-view

[Router] acl number 2001

[Router-acl-basic-2001] rule 1 permit source 10.1.1.1 0

[Router-acl-basic-2001] quit

[Router] acl number 2002

[Router-acl-basic-2002] rule 2 permit source 10.1.1.2 0

[Router-acl-basic-2002] quit

[Router] acl number 2003

[Router-acl-basic-2003] rule 3 permit source 10.1.1.3 0

[Router-acl-basic-2003] quit

[Router] acl number 2004

[Router-acl-basic-2004] rule 1 permit source 10.1.1.4 0

[Router-acl-basic-2004] quit

# Mark each flow with a priority.

[Router] traffic classifier class1

[Router-classifier-class1] if-match acl 2001

[Router-classifier-class1] quit

[Router] traffic classifier class2

[Router-classifier-class2] if-match acl 2002

[Router-classifier-class2] quit

[Router] traffic classifier class3

[Router-classifier-class3] if-match acl 2003

[Router-classifier-class3] quit

[Router] traffic classifier class4

[Router-classifier-class4] if-match acl 2004

[Router-classifier-class4] quit

[Router] traffic behavior behavior1

[Router-behavior-behavior1] remark ip-precedence 5

[Router-behavior-behavior1] quit

[Router]traffic behavior behavior2

[Router-behavior-behavior2] remark ip-precedence 4

[Router-behavior-behavior2] quit