R3303-HP HSR6800 Routers Configuration Guides Index

configuring IS-IS dynamic
system-ID-to-host-name mapping, IPR-154
configuring IS-IS static system-ID-to-host-name
mapping, IPR-154
configuring IS-IS system-ID-to-host-name
mapping, IPR-154
IGMP snooping simulated member host port,
MCAST-22, MCAST-34
IGMP tracking function, MCAST-83
IP special address (all-one host ID), IPSER-17
IP special address (all-zero host ID), IPSER-17
IS-IS dynamic host name mapping, IPR-138
IS-IS system ID, IPR-126
MLD host tracking function, MCAST-300
MLDv2 receiver host state listening, MCAST-288
RIPv2 route reception, IPR-27
host port mapping (ASPF), SEC-343
hotfix
basic concepts, FM-114
installation prerequisites, FM-117
installing, FM-113
patch states, FM-114
hotkey configuration (CLI), FM-6
hotkeys (CLI), FM-5
HoVPN
configuring (MPLS L3VPN), MPLS-289,
MPLS-367
extension (MPLS L3VPN), MPLS-264
implementing (MPLS L3VPN), MPLS-263
network model (MPLS L3VPN), MPLS-262
recursion (MPLS L3VPN), MPLS-264
SPE-UPE (MPLS L3VPN), MPLS-264
HQoS
configuration, QACL-139
implementation on 6600/HSR6600/HSR6800,
QACL-139
implementation through interface-level
hierarchical CAR, QACL-140, QACL-147
implementation through nesting QoS policies,
QACL-139, QACL-144
HQoS configuration example
hierarchical CAR through nesting QoS policies,
QACL-151
HQoS through nesting QoS policies, QACL-149
HQoS through nesting QoS policies in MPLS
network, QACL-153
implementing intelligent load sharing through
interface-level hierarchical CAR, QACL-160
implementing per-IP bandwidth reservation and
sharing through interface-level hierarchical CAR,
QACL-158
reserving and sharing bandwidth through
interface-level hierarchical CAR, QACL-156
HTTP configuring operation (NQA), NM-15, NM-36
hub
DVPN network structure, IPSER-290
specifying, IPSER-297
tunnel establishment (DVPN), IPSER-292
hub-spoke
configuring network (MPLS L3VPN), MPLS-325
DVPN configuration, IPSER-320
networking scheme (MPLS L3VPN), MPLS-252
hub-spoke DVPN, IPSER-290
H-VPLS
access mode, MPLS-209
configuring BFD for primary link, MPLS-237
configuring PW redundancy (VPLS), MPLS-233
implementing, MPLS-209
LSP access, MPLS-210
LSP access PW redundancy, MPLS-211
QinQ access, MPLS-210
HW Terminal Access Controller Access Control
System. UseHWTACACS
HWTACACS
AAA configuration, SEC-7