R3303-HP HSR6800 Routers Configuration Guides Index

setting DLDP send advertisement packet interval,
HA-41
advertising
automatic route advertisement (MPLS TE),
MPLS-47
automatic route advertisement traffic forwarding
along tunnel (MPLS TE), MPLS-72
BGP default route to peer/peer group, IPR-214
CE and PE routing information exchange (IPv6
MPLS L3VPN), MPLS-395
configuring LDP label advertisement control
(MPLS), MPLS-19
configuring RIP summary route advertisement,
IPR-43
controlling MBGP route reception advertisement,
MCAST-204
enabling OSPF opaque LSA reception, IPR-85
IPv4 MBGP default route, MCAST-205
IPv6 BGP community attribute advertisement to
peer/peer group, IPR-382
IPv6 BGP peer/peer group default route
advertisement, IPR-370
IPv6 MBGP default route, 4
IS-IS default route advertisement, IPR-144
label mode (MPLS), MPLS-4
OSPF host route, IPR-77
OSPF opaque LSA advertisement enable, IPR-85
OSPF summary route advertisement
configuration, IPR-98
PE and CE routing information exchange (IPv6
MPLS L3VPN), MPLS-396
PE and PE routing information exchange (IPv6
MPLS L3VPN), MPLS-396
RIP default route, IPR-28
RIPng default route advertisement, IPR-300
RIPv2 summary route, IPR-27
routing information (IPv6 MPLS L3VPN),
MPLS-395
routing information (MPLS L3VPN), MPLS-254
TE attribute (MPLS TE), MPLS-41
AFT
4to6 policy configuration, IPSER-213
6to4 policy configuration, IPSER-212
AFT limitation, IPSER-209
AFT mode, IPSER-206
AFT operation, IPSER-207
configuration, IPSER-205, IPSER-210
displaying, IPSER-214
DNS64 configuration, IPSER-218
DNS64 function, IPSER-209
DNS64 prefix, IPSER-205
IPv4-to-IPv6 static mapping configuration,
IPSER-211
IVI address, IPSER-206
IVI prefix, IPSER-206
maintaining, IPSER-214
protocols and standards, IPSER-209
stateful AFT, IPSER-206
stateless AFT, IPSER-206
troubleshooting, IPSER-221
AFT fail to perform address translation
troubleshooting, IPSER-221
age (IS-IS LSP max age), IPR-149
agent
configuring sending traps to host (SNMP),
NM-92
configuring sFlow agent, NM-183
aggregate CAR
configuration, QACL-31
guidelines, QACL-53
restrictions, QACL-53
aggregate interface
configuration, 16
description configuration, 16
enabling BPDU tunneling in Layer 2 aggregate
interface view, 81