R3303-HP HSR6800 Routers Configuration Guides Index

O
OAM. See Operation Administration and
Maintenance
continuity check, WAN-5
F5 loopback, WAN-5
obtaining
PKI certificate, SEC-225
troubleshooting PKI CA certificate obtain failure,
SEC-239
offline
DHCP client detection, IPSER-46
DHCP relay agent detection, IPSER-60
offline detect timer (MAC authentication), SEC-111
one-to-one
configuring static NAT, IPSER-99
one-to-one VLAN mapping, 174, 194, 200
one-to-two VLAN mapping, 174, 186, 194, 200
online
802.1X user handshake function, SEC-91
user (portal authentication), SEC-133
online help (CLI), FM-4
online user (QoS policy application), QACL-24
opaque LSA (OSPF), IPR-85
open ring
edge, HA-52
Open Shortest Path First. SeeOSPF
operating mode
VRRP load-balancing, HA-137, HA-144
VRRP standard, HA-137
operating principle (P2MP GRE), IPSER-274
operation
basic NAT, IPSER-95
DNS mapping,
IPSER-97
easy IP, IPSER-98
internal server, IPSER-96
LDP (MPLS), MPLS-8
LDP session establishment (MPLS), MPLS-8
LDP session maintenance (MPLS), MPLS-8
LDP session termination (MPLS), MPLS-8
NAPT, IPSER-95
NAT, IPSER-95
NAT support for MPLS VPN, IPSER-98
scheduling NQA, NM-29
SNMP, NM-87
support for special protocol, IPSER-98
operation mode
NTP multicast, NM-54
operation mode
NTP broadcast, NM-54
operation mode
NTP symmetric peers, NM-54
operation mode
NTP configuration, NM-57
operation mode
NTP client/server configuration, NM-57
operation mode
NTP symmetric peers configuration, NM-58
operation mode
NTP broadcast configuration, NM-58
operation mode
NTP multicast configuration, NM-59
operation mode
NTP client/server configuration, NM-68
operation mode
NTP symmetric peers configuration, NM-69
operation mode
NTP broadcast configuration, NM-71
operation mode
NTP multicast configuration, NM-72
operation mode
NTP client/server mode with authentication,
NM-75