R3303-HP HSR6800 Routers Configuration Guides Index

configuring BGP MDT, MCAST-242
configuring BGP MDT peers or peer groups,
MCAST-242
configuring BGP MDT route reflector,
MCAST-243
configuring BGP MED attribute, IPR-221
configuring BGP NEXT_HOP attribute, IPR-223
configuring BGP NSR, IPR-240
configuring BGP path selection, IPR-264
configuring BGP peer, IPR-206
configuring BGP peer group, IPR-207
configuring BGP route dampening, IPR-219
configuring BGP route distribution filtering policy,
IPR-214
configuring BGP route preference, IPR-220
configuring BGP route reception filtering policy,
IPR-214, IPR-216
configuring BGP route reflector, IPR-237, IPR-259
configuring BGP route summarization, IPR-213,
IPR-254
configuring BGP soft reset, IPR-234
configuring BGP SoO (MPLS L3VPN), MPLS-301,
MPLS-387
configuring BGP update send interval, IPR-229
configuring BGP VPNv4 subaddress family
common routing (MPLS L3VPN), MPLS-281
configuring BGP VPNv4 subaddress family
routing (MPLS L3VPN), MPLS-281
configuring BGP VPNv4 subaddress family
specific routing (MPLS L3VPN), MPLS-282
configuring BGP-IGP synchronization, IPR-249
configuring BGP-VPNv6 subaddress family
routing (IPv6 MPLS L3VPN), MPLS-404
configuring BIDIR-PIM, MCAST-126, MCAST-160
configuring BIDIR-PIM administrative scoping,
MCAST-134
configuring BIDIR-PIM admin-scope zone
boundary, MCAST-134
configuring BIDIR-PIM BSR, MCAST-130
configuring BIDIR-PIM C-BSR, MCAST-130
configuring BIDIR-PIM C-BSR for admin-scope
and global-scope zones, MCAST-135
configuring BIDIR-PIM C-BSR timer, MCAST-132
configuring BIDIR-PIM C-RP, MCAST-129
configuring BIDIR-PIM C-RP timers globally,
MCAST-130
configuring BIDIR-PIM domain border,
MCAST-131
configuring BIDIR-PIM RP, MCAST-128
configuring BIDIR-PIM static RP, MCAST-128
configuring blacklist, 11, 15
configuring BPDU tunneling destination
multicast MAC address, 81
configuring BPDU tunneling for PVST, 83
configuring BPDU tunneling for STP, 82
configuring bypass tunnel on PLR (MPLS TE),
MPLS-78
configuring CAR list-based traffic policing,
QACL-38
configuring CAR-list-based traffic policing,
QACL-147
configuring carrier's carrier (IPv6 MPLS L3VPN),
MPLS-439
configuring carrier's carrier (MPLS L3VPN),
MPLS-349
configuring CBQ, QACL-57, QACL-65
configuring CCC (MPLS L2VPN), MPLS-165
configuring CDP compatibility, 214
configuring CDP-compatible LLDP, 219
configuring CE1 interface, IF-28
configuring CE3 interface, IF-41
configuring CFD, HA-28
configuring CFD continuity check on MEP,
HA-25
configuring CFD function, HA-25
configuring CFD linktrace on MEP, HA-26
configuring CFD loopback on MEP, HA-26
configuring CFD MEP, HA-24