R3303-HP HSR6800 Routers Configuration Guides Index

configuring port security userLoginWithOUI,
SEC-177
configuring portal detection functions, SEC-137
configuring portal server detection, SEC-156
configuring portal server detection functions,
SEC-138
configuring portal user information
synchronization, SEC-139, SEC-156
configuring portal-free rule, SEC-131
configuring port-based multicast VLAN, 29, 35
configuring port-based multicast VLAN user port
attribute, 29
configuring port-based VLAN, 95
configuring POS interface, IF-50, IF-54
configuring PPP, WAN-49
configuring PPP authentication, WAN-31
configuring PPP encapsulation (MPLS L2VPN),
MPLS-163
configuring PPP IP header compression,
WAN-46
configuring PPP negotiation, WAN-35
configuring PPP negotiation timeout time,
WAN-35
configuring PPP user binding, WAN-40
configuring PPPoA, WAN-16, WAN-21
configuring PPPoE server, WAN-69, WAN-71
configuring PPPoEoA, WAN-17
configuring PPPoEoA server, WAN-22
configuring PQ, QACL-53, QACL-54
configuring pre-shared key authentication, main
mode IKE, SEC-295
configuring pre-shared key of VAM client,
IPSER-300
configuring pre-shared key of VAM server,
IPSER-297
configuring primary and backup SVCs for
service instance (MPLS L2VPN), MPLS-168
configuring primary and backup SVCs on Layer
3 interface (MPLS L2VPN), MPLS-167
configuring priority mapping, QACL-26
configuring priority mapping table, QACL-27,
QACL-30
configuring priority marking, QACL-29,
QACL-30, QACL-92, QACL-93
configuring protected VLAN for Smart Link
group, HA-119
configuring protocol-based VLAN, 103, 104
configuring public keys, SEC-210
configuring PVC parameters, WAN-8
configuring PVC service mapping, WAN-10
configuring PVCs and the maximum number of
PVCs allowed on interface, WAN-8
configuring PW redundancy for H-VPLS (VPLS),
MPLS-233
configuring QinQ, 141, 147
configuring QinQ termination, 158
configuring QinQ VLAN tag TPID value, 146
configuring QinQ VLAN transparent
transmission, 142, 152
configuring QoS ACL-based traffic policing,
QACL-38
configuring QoS policy, QACL-19
configuring QoS policy, IPR-434
configuring QoS policy (traffic mirroring),
NM-127
configuring QoS policy nesting, QACL-22,
QACL-146
configuring QoS policy routing, IPR-434
configuring QoS policy routing (IPv4), IPR-435
configuring QoS policy routing (IPv6), IPR-436
configuring QoS tokens, QACL-68
configuring QPPB, QACL-101, QACL-103,
QACL-105 , Q ACL-111
configuring RADIUS accounting-on, SEC-35
configuring RADIUS class attribute as CAR
parameter, SEC-36
configuring RADIUS related attributes, SEC-134