R3303-HP HSR6800 Routers Configuration Guides Index

planning IRF fabric setup, IRF-13
preconfiguring IRF member device (standalone
mode), IRF-13
processing RIPng packets, IPR-298
rebooting device, FM-134
recording host public key information, SEC-207
recovering IRF fabric, IRF-28
redisplaying unsubmitted commands, FM-7
redistributing BGP IGP routing information,
IPR-212
redistributing OSPF loopback interface route
into BGP (MPLS L3VPN), MPLS-290
removing BGP private AS numbers from updates
to peer/peer group, IPR-227
removing directory, FM-99
removing patches from patch memory area,
FM-121
removing PKI certificate, SEC-227
renaming file, FM-97
reserving and sharing bandwidth through
interface-level hierarchical CAR, QACL-156
resetting BGP connection (IPv6 MPLS L3VPN),
MPLS-414
resetting BGP connection (MPLS L3VPN),
MPLS-302
resetting BGP connection (VPLS), MPLS-217
resetting BGP connections, IPR-244
resetting BGP L2VPN session (Kompella MPLS
L2VPN), MPLS-175
resetting DLDP state, HA-42
resetting DLDP state in port/port group view,
HA-43
resetting DLDP state in system view, HA-43
resetting IPv6 BGP connections, IPR-388
resetting IPv6 MBGP connection, 16
resetting LDP session (MPLS), MPLS-20
resetting MBGP connections, MCAST-218
restarting standby MPU, HA-6
restarting with LDP GR (MPLS), MPLS-25
restoring configuration file by using TFTP,
FM-108
restoring file, FM-98
restoring IRF standalone mode, IRF-38
returning to upper-level view, FM-3
returning to user view, FM-3
RPR configuration, HA-69
RPR interface binding configuration, HA-69
RPR protection mode/static ringlet selection
configuration, HA-71
saving host public key to a file, SEC-207
saving IRF next startup configuration file
(standalone mode), IRF-14
saving running configuration, FM-105
scheduling device reboot, FM-135
scheduling modular job, FM-137
scheduling non-modular job, FM-137
scheduling NQA operation, NM-29
sending back ICMP TTL exceeded messages
(MPLS), MPLS-23
setting 802.1X authentication timeout timers,
SEC-90
setting 802.1X port authorization state, SEC-88
setting a local user password in interactive mode,
SEC-196
setting CLP bit for ATM cells, WAN-9
setting command history buffer size, FM-9
setting DLDP DelayDown timer, HA-41
setting DLDP mode, HA-40
setting DLDP port shutdown mode, HA-42
setting DLDP send advertisement packet interval,
HA-41
setting expected bandwidth for aggregate
interface, 18
setting file system operation modes, FM-101
setting hello interval, WAN-88
setting HWTACACS packet shared keys, SEC-41
setting HWTACACS timers, SEC-43