R3303-HP HSR6800 Routers Fundamentals Command Reference

95
Usage guidelines
This command applies only when the device is in unmounted state.
Do not remove the storage medium or swap a card when mounting or unmounting the device, or when
you are processing files on the storage medium. Otherwise, the file system could be damaged.
When a storage medium is connected to a lower version system, the system might not be able to
recognize the device automatically, in which case you must use the mount command for the storage
medium to function correctly.
Before removing a mounted storage medium from the system, unmount it to avoid damaging the storage
medium.
Examples
# In standalone mode, mount the CF card of the standby MPU (in slot 1).
<Sysname> mount slot1#cfa0:
% Mount slot1#cfa0: successfully.
%Apr 23 01:50:00:628 2008 Sysname VFS/5/LOG:
cfa0: mounted into slot 1.
# In IRF mode, mount the CF card of the master.
<Sysname> mount cf:
% Mount cf: successfully.
%Apr 23 01:50:00:628 2008 Sysname VFS/4/LOG:
cf: mounted into chassis 1 slot 4.
# In IRF mode, mount the CF card in slot 1 of the subordinate device with the member ID 2.
<Sysname> mount chassis2#slot1#cf:
% Mount chassis2#slot1#cf: successfully.
%Apr 23 01:50:00:628 2008 Sysname VFS/5/LOG:
cf: mounted into chassis 2 slot 1.
Related commands
umount
move
Use move to move a file.
Syntax
move fileurl-source fileurl-dest
Views
User view
Default command level
3: Manage level
Parameters
fileurl-source: Name of the source file.
fileurl-dest: Name of the target file or folder.