R3303-HP HSR6800 Routers Fundamentals Command Reference

108
Field Descri
p
tion
Slot n
Displays the startup configuration files on the standby
MPU in slot n.
Related commands
startup saved-configuration
display this
Use display this to display the running configuration in the current view.
Syntax
display this [ by-linenum ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
by-linenum: Displays the number of each line.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use this command to verify the configuration you have made in a certain view.
Typically, this command does not display parameters that are set to their default settings.
For some parameters that can be successfully configured even if their dependent features are not enabled,
this command displays their settings after the dependent features are enabled.
Executed in any user interface view, this command displays the running configuration of all user view
interfaces.
Executed in any VLAN view, this command displays the running configuration of all VLANs.
Examples
# Display the running configuration on interface GigabitEthernet 4/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 4/0/1
[Sysname-GigabitEthernet4/0/1] display this
#
interface GigabitEthernet4/0/1
port link-mode route