R3303-HP HSR6800 Routers Fundamentals Command Reference

117
You can also specify a configuration file as the startup configuration file to be used at the next startup
when you use the save command save the running configuration to it.
Examples
# In standalone mode, specify a next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ...
Setting the master board ..........
... Done!
Setting the slave board ...
Slot 1:
Set next configuration file successful
# In IRF mode, specify a next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ...
Setting the master board ..........
... Done!
Setting the slave board ...
Chassis 2 Slot 1:
Set next configuration file successfully
Related commands
display startup