R3303-HP HSR6800 Routers Fundamentals Command Reference

118
Software upgrade commands
The router supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
The MPU slot number in this document is for reference only.
boot-loader
Use boot-loader to specify a startup system software image for an MPU.
Syntax
In standalone mode:
boot-loader file file-url slot slot-number { main | backup }
In IRF mode:
boot-loader file file-url chassis chassis-number slot slot-number { main | backup }
Views
User view
Default command level
3: Manage level
Parameters
file file-url: Specifies a system software image file. The file-url argument specifies the file path, a string of
1 to 63 characters. If you enter a relative path, the system automatically converts it to an absolute path.
The absolute path can contain up to 63 characters. The file path uses the drive:/file-name format or the
file-name format, where:
• The drive argument specifies the storage medium where the file is saved. If the device has only one
storage medium, you can omit the storage medium name. Table 13
shows how a storage medium
on an MPU is identified.
Table 13 MPU identifications
MPU role Identification format
Exam
p
le Remarks
• Active MPU in
standalone
mode
• Global active
MPU in IRF
mode
StorageMediumName cfa0 -
Standby MPU in
standalone mode.
slotslot-number#StorageMediumName
slot1#cfa0
slot-number—Slot
number of the MPU.