R3303-HP HSR6800 Routers Fundamentals Command Reference

120
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
In IRF mode:
# Specify test.bin as the main startup system software image file for the global active MPU (slot 0 on IRF
member 1). This example assumes that this file has been saved in the root directory of the storage
medium on the MPU.
<Sysname> boot-loader file test.bin chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1
slot 0!
# Specify test.bin as the main startup system software image file for a standby MPU (in slot 1 of IRF
member 1). This example assumes that this file has been saved in the root directory of the storage
medium on the MPU.
<Sysname> boot-loader file chassis1#slot1#cfa0:/test.bin chassis 1 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1
slot 1!
Related commands
display boot-loader
boot-loader update slot
Use boot-loader update slot to upgrade the system software image for the standby MPU.
Syntax
boot-loader update slot slot-number
Views
User view
Default command level
3: Manage level
Parameters
slot slot-number: Specifies the slot number of the standby MPU.
Usage guidelines
This command only upgrades the main system software image for the standby MPU.
In FIPS mode, the file must pass authenticity verification before it can be set as a startup system software
image file.
Examples
# Upgrade the system software image for the standby MPU in slot 1.
<Sysname> boot-loader update slot 1